Post by Transbot9 on Mar 4, 2004 19:33:13 GMT -5
A few more pics, now with Bombvern Cannonry (warning, very large):
www.lbstudios.net/temp/PDR_0170.JPG
www.lbstudios.net/temp/PDR_0168.JPG
www.lbstudios.net/temp/PDR_0167.JPG
It started life as a Gordos...
The Head:
Made from: Gordos head (back top part of head/cockpit), Gordos neck (everything's more or less glued to it), shoulder armor of a 1/100 MS Serpent (cheeks), the wing off an Optimal Optimus (horn), skidplate off a Bear fighter (nose), a shoulder plate from a 1/100 Gundam Deathscythe Hell (second canopy plate, held on by lego destroy droid parts)
The Back:
Made from: Gordos back plate, flat 2x2 lego brick for a connector, and a Gordos tail spike reborn as the Grand Rhimos tail.
The AA turrent: Head of a Gunsniper, the trimmed down tail gunner station of the Gordos, and a 2x2 flat lego brick for a connector.
Lego swivel hinge sandwiched (but not glued) between the two connectors
Yes, I DID blatently use Pheno's "Lego system" ;D
The Strike Laser Claw battle damage on the head was done using a file to cut grooves in it, and trimmed with glue from a glue gun. It's a little small to be a Liger Zero SLC, but it works for a Shadow Fox SLC.
www.lbstudios.net/temp/PDR_0170.JPG
www.lbstudios.net/temp/PDR_0168.JPG
www.lbstudios.net/temp/PDR_0167.JPG
It started life as a Gordos...
The Head:
Made from: Gordos head (back top part of head/cockpit), Gordos neck (everything's more or less glued to it), shoulder armor of a 1/100 MS Serpent (cheeks), the wing off an Optimal Optimus (horn), skidplate off a Bear fighter (nose), a shoulder plate from a 1/100 Gundam Deathscythe Hell (second canopy plate, held on by lego destroy droid parts)
The Back:
Made from: Gordos back plate, flat 2x2 lego brick for a connector, and a Gordos tail spike reborn as the Grand Rhimos tail.
The AA turrent: Head of a Gunsniper, the trimmed down tail gunner station of the Gordos, and a 2x2 flat lego brick for a connector.
Lego swivel hinge sandwiched (but not glued) between the two connectors
Yes, I DID blatently use Pheno's "Lego system" ;D
The Strike Laser Claw battle damage on the head was done using a file to cut grooves in it, and trimmed with glue from a glue gun. It's a little small to be a Liger Zero SLC, but it works for a Shadow Fox SLC.
