|
Post by LordGale on Feb 1, 2004 19:46:52 GMT -5
Can anybody who's scratchbuilt a Buster Fury post pics of it, I'd like to see what you guys have done
|
|
|
Post by CND-Conspiriter on Feb 1, 2004 20:18:20 GMT -5
I dont think its possiblw iv never seen it done atleast
|
|
|
Post by Skvora on Feb 1, 2004 22:07:45 GMT -5
Isnt eagle a CAS for fury? If not get some superglue and clippers...
|
|
|
Post by Genisis on Feb 1, 2004 22:58:36 GMT -5
Isnt eagle a CAS for fury? If not get some superglue and clippers... What they show on the Fuzors cartoon isnt related in any way to reality, or what you can do easily with the actual Zoids models themselves.......
|
|
|
Post by Phenotype on Feb 2, 2004 2:35:22 GMT -5
Isnt eagle a CAS for fury? If not get some superglue and clippers... DEFINITELY NOT! Man I hate what Fuzors is doing, it's like a mass distribution of minsinformation. Allow me to clear this up. The model kits follow the Official Battle Story, not the Anime. Buster Eagle is a Republic Zoid, Berserk Fuhrer is an Empire Zoid. Not only that but Berserk Fuhrer was designed before Blox even came out, also, Buster Eagle is not a CAS and his guns were designed specifically to be used with Gojulas Giga. So, obviously they were never meant to combine. I think it's a stupid combo anyways. -Phenotype
|
|
Transbot9
Major
Systems Coodinator
Posts: 837
|
Post by Transbot9 on Feb 2, 2004 11:28:59 GMT -5
Yes, it is possible to fuse them pretty close to the show, no it's probably not a good idea (makes the Fury even more top-heavy as well as looking odd), and yes, if the connectors on the Buster Fury's part that the buster claws & ion boosters attach to are as loose as mine, you may need to use a drop of hot glue (It won't damage the Zoid and if you use only a little bit, you can break the connection if needed by using excessive force). To make it: 1. remove the Buster Claws from the Fury 2. remove the bracer/clips on the B.E.'s lower legs 3. remove the interior leg parts on the lower legs. (the white L-shaped parts on the inside of the legs) 4. Detach the rest of the lower legs (including foot), rotate it around 180 degrees so that the toes on the foot face backwards and the other L-shaped part is now on the inside. 5. reattach the lower legs on backwards, leave off the first two L-brackets that you took off (need them later) 6. fold the legs under the B.E. (might be tricky, as the wing helps lock it in place after this is complete). 7. Remove Buster Eagle's chest plate. 8. You see those pegs on the Buster Eagle's knee joint that are jutting out? Attach the buster claws there. 9. You know those two leg parts that were taken off in the beginning? We're going to use them now. The end with shorter part of the L-bracket attaches on the pegs on the neck, and the end with the longer part of the L-braket attaches where the Buster Claws were attached on the Fury. Congradulations, you now have an abomination!
|
|
|
Post by Tilly on Feb 2, 2004 14:14:44 GMT -5
I still think it's a Black Guardian wannabe...
|
|
|
Post by LordGale on Feb 2, 2004 18:38:54 GMT -5
I still dunno how the BF can use the Buster Claws in the anime, but then the BE's wings can pass right through the BF's basic boosters, so....
|
|
|
Post by Tyrannotaur on Feb 2, 2004 19:03:16 GMT -5
I'll post mine when I get my pics deveolped . my digi cam is horible so.. i'll wait on that.
|
|
Transbot9
Major
Systems Coodinator
Posts: 837
|
Post by Transbot9 on Feb 2, 2004 22:51:17 GMT -5
I'm not to fond of the flapping wings in the anime. The Ion Boosters on the Fury just tuck underneith the Buster Eagle's hind legs. The Buster claws just have a limited range of motion, but they are flexible to get some use out of them.
|
|
|
Post by Quatre on Feb 4, 2004 10:20:27 GMT -5
I salute you for finding a way. Now i have to get BF and then i could do it, or just get some other zoiods like double sworder or lighting saix.......
|
|
Transbot9
Major
Systems Coodinator
Posts: 837
|
Post by Transbot9 on Feb 4, 2004 14:50:45 GMT -5
*shrug* just payed attention while watching the show - other than the interior blox compressing together it's just like the show.
|
|
|
Post by Tyrannotaur on Feb 4, 2004 19:46:17 GMT -5
It's actually impossible ,without breaking the eagle, to make a true Buster Fury b/c the cannons aren't that high up. they are level with the wings. Look at pics on Zoids evolution. you'll see what i mean
Update: Well I made it last night. It's about as show accurate I can get with out glueing and cutting.
I'll post pics of my first attempt at Buster Fury and the One I made last night. What i did was look at the zoid from every angle with pics from Zoids Evolution. Then I coppied how it was put together.
|
|
|
Post by Skvora on Feb 5, 2004 15:41:38 GMT -5
to what Pheno said, fuzors do show L0 and Phoenix, but buster is a BCAS for L0 as well, so in few places fuzors is accurate.
|
|
|
Post by Andy F² on Feb 5, 2004 15:45:15 GMT -5
I didn't think Buster was a BCAS for Zero?
|
|