Post by Gojulas Omega on Jul 29, 2014 15:18:40 GMT -5
It's been a long time since my last custom post in any forum....
This post has 3 custom, although i just done little bit modified, but they are big....huge. Anyway, here they are-
Ultra Saurus MK-II ver. GO
This is one of my last year custom, but some how I didn't take photos until now....
This is a NJR Ultra Saurus + Techno Zoids's clear parts and CPs
Side
Compare to the original Ultra Saurus MK-II, my one just missing the stabilizer for the tail.
Front
I painted it to looks similar to OJR version.
Parts had been modific
Beside, the missile pod, I just simply put the CPs on it. The part to hold the CP-10, it's from Cannoneer Gordos. Missile pod is CP-15, then cut it to half and put blox adapter in it. Not much of a custom.
============================================
Next one, also from last year
Mad Thunder DCS
Want to power up my Mad Thunder, but don't know any good idea(during last year), so using the HMM Double Beam Cannon set to custom it.
Side
Not just the cannon on the top, but I did put most of the Double Beam Cannon parts on it.
Front
Also change the Light grey armor to be silver.
Back
The down point....the space between Double Beam Cannon
Cannon rotating
All Cannon can rotating, no glue etc to fix them on position. Well....without batteries, that what Mad Thunder can do....
And if you wondering why I use a rare HMM Double Beam Cannon kit, then don't worry, this one is a China bootleg one, much cheaper.
(but take more time to trim the parts and glue them....)
Parts that had been modified
For Double Beam Cannon, I glue a extra plastic beam(square) on both arms, then drill a hole on the beam and arms(in the circle). The stock cannon(CP-01's base) also use the HMM one, and last, just put the cannon on the tail, that's enough to make Mad Thunder look much bigger. Also I can turn it back to Mad Thunder anytime by remove all these parts and put back the CP-01 on.
============================================
Last one, and this is one of my latest build-
Death Saurer MK-II Kai
Not too long ago, I just took out my old Death Saurer, wash the old paint and get ready to repaint it. Then, I just had another NJR Death Saurer with 2 parts damage. So I just use my old one to swap the damaged parts from another Death Saurer(so I can complete it).
First, I was thinking to repair the parts and keep it to be normal Death Saurer, but after I saw Darwock's Bloody Death Saurer, I just want something similar thing. Since I have some damage CPs parts from those junk lot I received this year, so I just took out 1 of my saved CP-11 and put them together on my Death Saurer. When everything put one, it looks nice, but it's lack of weapons(don't have extra PK's weapons at that time), doesn't look as good as Darwock's one(well....not even close) and the left over parts(mostly the main part + booster nose from CP-11), that's look very wasteful. So I try to put more parts on it and use some junk parts to arming it.
Front
Using a junk gatling gun from my junk Dark Horn(since I had a complete set for it already), successfully give Death Saurer stronger fire power and more ability to fight for the high speed Zoids.
Side
Although I left all the small guns out, but all the missiles and beam gatling gun are more than enough for it, and a blade on the head for close combat. Make it look/feel stronger but little bit cleaner than original one.
Modific-1
To put the base of CP-11 on it is simple(much simple than I though), just turn the base around, trim the 1st plastic bar a bit(where the red circle show) until it can fit and able to slide on to CP-02. For CP-02, you don't need to put Y11 on, just Y1, Y2, Y3 and Y7 on.
Next to the holding arm for gatling gun, just drill a samll 3mm hole, so it can hold itself on Death Saurer's right arm more stable.
Modific-2
Ignore my damaged C9 part, all I done here is get a small 3mm plastic beam on it, so it can help out to hold the CP-11 better.
(but optional, after you slide on CP-02, it won't fall off easily)
This post has 3 custom, although i just done little bit modified, but they are big....huge. Anyway, here they are-
Ultra Saurus MK-II ver. GO
This is one of my last year custom, but some how I didn't take photos until now....
This is a NJR Ultra Saurus + Techno Zoids's clear parts and CPs
Side
Compare to the original Ultra Saurus MK-II, my one just missing the stabilizer for the tail.
Front
I painted it to looks similar to OJR version.
Parts had been modific
Beside, the missile pod, I just simply put the CPs on it. The part to hold the CP-10, it's from Cannoneer Gordos. Missile pod is CP-15, then cut it to half and put blox adapter in it. Not much of a custom.
============================================
Next one, also from last year
Mad Thunder DCS
Want to power up my Mad Thunder, but don't know any good idea(during last year), so using the HMM Double Beam Cannon set to custom it.
Side
Not just the cannon on the top, but I did put most of the Double Beam Cannon parts on it.
Front
Also change the Light grey armor to be silver.
Back
The down point....the space between Double Beam Cannon
Cannon rotating
All Cannon can rotating, no glue etc to fix them on position. Well....without batteries, that what Mad Thunder can do....
And if you wondering why I use a rare HMM Double Beam Cannon kit, then don't worry, this one is a China bootleg one, much cheaper.
(but take more time to trim the parts and glue them....)
Parts that had been modified
For Double Beam Cannon, I glue a extra plastic beam(square) on both arms, then drill a hole on the beam and arms(in the circle). The stock cannon(CP-01's base) also use the HMM one, and last, just put the cannon on the tail, that's enough to make Mad Thunder look much bigger. Also I can turn it back to Mad Thunder anytime by remove all these parts and put back the CP-01 on.
============================================
Last one, and this is one of my latest build-
Death Saurer MK-II Kai
Not too long ago, I just took out my old Death Saurer, wash the old paint and get ready to repaint it. Then, I just had another NJR Death Saurer with 2 parts damage. So I just use my old one to swap the damaged parts from another Death Saurer(so I can complete it).
First, I was thinking to repair the parts and keep it to be normal Death Saurer, but after I saw Darwock's Bloody Death Saurer, I just want something similar thing. Since I have some damage CPs parts from those junk lot I received this year, so I just took out 1 of my saved CP-11 and put them together on my Death Saurer. When everything put one, it looks nice, but it's lack of weapons(don't have extra PK's weapons at that time), doesn't look as good as Darwock's one(well....not even close) and the left over parts(mostly the main part + booster nose from CP-11), that's look very wasteful. So I try to put more parts on it and use some junk parts to arming it.
Front
Using a junk gatling gun from my junk Dark Horn(since I had a complete set for it already), successfully give Death Saurer stronger fire power and more ability to fight for the high speed Zoids.
Side
Although I left all the small guns out, but all the missiles and beam gatling gun are more than enough for it, and a blade on the head for close combat. Make it look/feel stronger but little bit cleaner than original one.
Modific-1
To put the base of CP-11 on it is simple(much simple than I though), just turn the base around, trim the 1st plastic bar a bit(where the red circle show) until it can fit and able to slide on to CP-02. For CP-02, you don't need to put Y11 on, just Y1, Y2, Y3 and Y7 on.
Next to the holding arm for gatling gun, just drill a samll 3mm hole, so it can hold itself on Death Saurer's right arm more stable.
Modific-2
Ignore my damaged C9 part, all I done here is get a small 3mm plastic beam on it, so it can help out to hold the CP-11 better.
(but optional, after you slide on CP-02, it won't fall off easily)
