dri1
Lance Corporal
Posts: 73
|
Post by dri1 on Apr 27, 2006 22:30:56 GMT -5
I checked my old files for Clear Leostriker with CP-D and this how it looks like    Agree with MystickSkye a translucent blox suits well for this. Will try it once I'm back in PI. dri1 |
|
|
|
Post by bellyheng on Apr 27, 2006 23:54:05 GMT -5
Nice~ Cant wait for my Part D to arrive  I do have some clear blox.... but dont know where's it from |
|
|
|
Post by stormhawk on Apr 28, 2006 0:07:14 GMT -5
Aye belly didn't tell me you gonna order the CP-D, if not I'd have done a joint order with you. I think your clear Blox were from those 6-piece blister packs with extra Blox pieces.  |
|
|
|
Post by Hidocker on Apr 28, 2006 9:34:27 GMT -5
I tried the translucent blox, but I only have one set, so they were all mismatched. One grey, and three shades of blue  (The other two went to my decalto dragon, which is much happier with them) |
|
|
|
Post by zed on Apr 28, 2006 9:43:49 GMT -5
An alternative is to gut half a dozen Baratz, though the lime green seals on the Baratz Blox might clash.
zed
|
|
|
|
Post by stormhawk on Apr 28, 2006 9:55:44 GMT -5
That'll be an expensive gutting project. |
|
|
|
Post by quattro on Apr 28, 2006 15:59:57 GMT -5
it is better to get an extra infinity leo. infinity leos blox are transparent.  |
|
|
|
Post by adamassc on Apr 28, 2006 18:41:25 GMT -5
it is better to get an extra infinity leo. infinity leos blox are transparent. Yeah, plus he's got that nifty gold Core Blox. Does LeoStriker have more or less Blox than Leoblaze? |
|
|
|
Post by 尹 眞悟 on Apr 28, 2006 19:37:36 GMT -5
I wouldn't bother myself, the clear black bits lok much better on the other forms of Leostriker where it actually compliments the zoid rather than turning it into a silly lump. If you insist of making it fully clear black then at the very least, swap the blox out with some translucent blox from the Infinity Leo or something. COUGHCOUGHCOUGH >_> At any rate, the Leostriker actually has one less core blox than the standard Leoblaze frame. The cockpit has an odd bit that drops down which takes the place of a blox piece. |
|
|
|
Post by Königbreaker on Apr 29, 2006 10:14:54 GMT -5
Yeah.. I freaked out when I got my first Leo Striker.. Thinking it would have 5 Blox like Leo Blaze.. I only saw 4 and I got so sad.. Then I realized the stupid cockpit. XD
|
|
Blitzwing
Captain
Losers whine about doing their best. Winners take home and do the prom queen.
Posts: 471
|
Post by Blitzwing on Jun 15, 2006 19:43:10 GMT -5
To prevent clutter...I'm posting this here: This Limited Edition Zoid was produced over a year ago along with the Leostriker HT. As you can tell from the box, this was part of the Fuzors series. Sadly, in some cruel twist of fate, this homey never came to the PI along with the Leostriker HT. I'm not gonna say much since a lot was already covered in stormhawk's initial post. Box:   Parts Out of the Box: I was surprised that the legs and main body are not holotech....booooooo!  Documentation: Just like the PI release of the Blue Command Wolf.... it has the same manual only this time it belonged to the correct Zoid...nothing too write home about the sticker sheet.  The finished product:      Command Striker HT     IMHO the red bits on this make it stand out aside from the Holotech parts. DA GOOD: 1. A very attractive piece DA BAD: 1. Pricey 2. The body and legs are non translucennt booooooo!!!  B) |
|
|
|
Post by Lionel on Jun 16, 2006 14:18:23 GMT -5
Don't forget that the Fuzor Raykong was released at the same time and was the third Zoid of this familly. It is easyer to find Raykong and Leostriker HT. I've heard that there was 10000 of each produced, and only 3000 CW HT.
Lionel
|
|
|
|
Post by 尹 眞悟 on Jun 16, 2006 18:13:02 GMT -5
According to a Yahoo Japan Auction I read the CW HT was relegated to a fairly obscure Limited Status being sold only at very certain places like conventions and such.
|
|
(The other two went to my decalto dragon, which is much happier with them)
