|
Post by ShadowFox on Dec 10, 2004 18:19:47 GMT -5
I am sorry but I dont know what that is
|
|
Juno
Major
Juno the numero uno
Posts: 941
|
Post by Juno on Dec 10, 2004 19:46:56 GMT -5
I think Orudius was that horse zoid from the OJR line.
~JuNo~
|
|
|
Post by KairuHakubi on Dec 10, 2004 23:42:41 GMT -5
A unisus/pegacorn, actually, though it said 'pegasus type' ^^' probably the grade-up zoid least like the other grade-ups and most like modern zoids. anyway, the only thing I can remember about where to find that custom is that it's definitely in pheno's site's japanese links under the customs section (if there is one)
|
|
|
Post by froggy on Dec 11, 2004 5:43:52 GMT -5
i made a gatling unit for my saber tiger just a while back and i gues the only thing i can suggest is cardbaord for the disks only problem is that you have to cut it in a perfect circle. i used the tipe of a dimetridon zoid's (i think thats what its called) gatling spine for the tip of my new gatling unit and those circular spinny parts from lego to make the barrels spin.
|
|
Wyvex Executor
Corporal
LOOKIE........... ITS A BULLFROG!!!
Posts: 159
|
Post by Wyvex Executor on Dec 11, 2004 6:53:05 GMT -5
Hi Hope I’m not too late with my 2 cents worth… Awhile back I made a gattling unit for my zaber custom , and I found that the ‘inner chamber’ of a 4 pen worked really well. All you need is 2 of these bits and some empty pen tubes with the nibs still attached, and then just simply insert the tubes and glue. I found that this way was easier then fiddling around and trying to align the tubes so they were perfectly straight. Also if you want to get rid of the threading on the bits, shave them down with a razor blade and then mould a new design with some milliput. Bare in mind that this is only for the barrels of the gun. Hope that helps and good luck. wyvex
|
|
|
Post by KairuHakubi on Dec 11, 2004 15:07:01 GMT -5
i had never thought of that.. the inside of one of those pens does look a lot like a 4-barrel vulcan doesnt' it! ^.^
|
|
|
Post by ShadowFox on Dec 12, 2004 16:57:14 GMT -5
Thats what i was trying to say when i said:
|
|
|
Post by KairuHakubi on Dec 12, 2004 19:25:54 GMT -5
*nod* i should have paid more attention.
|
|
Transbot9
Major
Systems Coodinator
Posts: 837
|
Post by Transbot9 on Dec 13, 2004 17:29:25 GMT -5
That reminds me...I need to see if the hardwear store has plastic washers. I think they do, but I keep forgetting to check.
|
|
|
Post by Skvora on Dec 20, 2004 9:55:11 GMT -5
Polystyrene, or styrene. Plastic sheets which are easy to cut and glue. Make whatever out of them. Same Evergreen makes sheets and tubes as well as Plastruct. Go to a craft or hobby store and pick some of these up. Really great things for scratch building. You can cut out your circular base, add tubes as barrels, and a lego piece behind to make it all spin. Dig through custom board for some of Gallen Wolf's work and my own Fast Pack cp.
|
|
|
Post by Hi my name is on Dec 22, 2004 4:06:11 GMT -5
i went to TRU today and found gattling guns that are blox compatible, on a totally different toy, for fifty cents ;D they are on those rumble cars customizing packs,iron spike attack, i think, and they are great i am modifiying my gunsniper to out fit them as i write this, at fifty cents these gattlings guns are the bomb
|
|
|
Post by KairuHakubi on Dec 22, 2004 9:57:36 GMT -5
Can you post a link to those TRU items? I'd like to sees them. I have an old missile launcher gun from something or other that is blox compatible.
|
|
|
Post by Hi my name is on Dec 22, 2004 23:29:01 GMT -5
here you go
|
|
|
Post by KairuHakubi on Dec 23, 2004 13:06:39 GMT -5
for only fitty cent? ima check that out!
|
|
|
Post by ShadowFox on Dec 31, 2004 8:16:21 GMT -5
wow that was a good find, if only we had stuff like that in oz HAPPY NEW YEAR!
|
|