Post by Gojulas Omega on Jan 1, 2013 1:08:03 GMT -5
Well....it's quite a while.....here is my entries for this year Zoids Poison Custom Contest-
LB Burning Gojulas
LB Burning Gojulas is a variation of the LB King Gojulas. Compare to the original Gojulas, it's missing a lot of weapons, especially the chest Super Gatling Cannon. However, it's improve a lot of it deference and speed.
For deference power, base on it super strong and hard armor, Burning Gojulas equip a hyper E-shield generator to replace the Super Gatling Cannon, and install the Ray-Absorbing Verniers on the back(the fins). Give it's almost perfect protection from every direction.
For the speed, since they replace the heavy Super Gatling Cannon by Hyper E-shield Generator and Ray-Absorbing Verniers, the total weight is went down quite a lot but the Generator can has more output since Hyper E-shield Generator don't need that much output as the Super Gatling Gannon. The speed and mobility of LB Burning Gojulas has increase. Also it has add a few more booster on back and legs, give LB Burning Gojulas 50% more speed and 70% more mobility than LB King Gojulas.
For the weapons, since the Super Gatling Cannon has been remove, it miss most of it's fire power. Only the Super Sonic Blaster and a few deference weapons left around the tail. Even through the fire power has decrease a lot, but the Super Sound Blaster has power up thanks for cutting the Super Gatling Cannon and the Ray-Absorbing Verniers. It's also can choose from focus mode and diffuse mode, so it can still against a lot among of enemies. Also, the arms' claw been change to a Strike Laser Claw, give it even more damage during close combat.
Front-
Side-
Back-
Top-
Over all the spec is the same as the normal LB King Gojulas, but every time run the simulation or test battle, LB Burning Gojulas will won at the end. With the higher defense and speed, it soon get close to the LB King Gojulas. Then when they battle at close range, the E-shield can become weapons and the Strike Laser Claw can give a bigger damage. Or when both Zoids using Super Sound Blaster, since LB Burning Gojulas has more output, every time will end up LB Burning Gojulas winning too.
Although scientist said LB Burning Gojulas is only a variation of the LB King Gojulas, but there has rumor said, LB Burning Gojulas is a evolution of the LB king Gojulas by some of the unknown reason.
Action post 1
well....not much increase of the move-ability....
Actions post 2
I like this post better.
For the model itself, yes, it just base on my LB King Gojulas, and I just change some of the parts of building it. More important is, I try to make it to looks like the 1980's Godzilla feel, so I choose those make more fins on the back and cut the horn on the head. And since Bandai will release the Burning Godzilla(Godzilla in 1995)soon, I change the color scheme to be the Burning Godzilla's feel.
Compare to the LB King Gojulas
Not much special or improve to compare the original LB King Gojulas....
Compare to the SH Monsterarts
Since the Burning is not release yet, use this one first.
The final battle?
Well....don't have LB Space Gojulas(?) for now, so just use the Space Godzilla first.
The next, my Cal A entry-
PZ-006 Chamander
Poke Zoids(?)
Front
Side
Back
Some how I have some last min idea, since I'm not really good at paint job, and Cal A has some great entry already. But when lack of time, it extremely hard to finish another custom. So try to use repaint to make a Zoids to look like something. But what kind of something? I didn't through too much, until I saw this SD Death Saurer, then I'm thinking it looks like a pokemon, and after a little re-search, I design to re-color to a orange, hope it will looks like a chamander.
Since it don't have too much different color, it has done in a short time. After re-paint, I also add the decal eyes from some left over figure decal. But when everything put together, it doesn't looks what I hope for. Although it is cute, but it is not that cute as I through.
(Death Saurer is too mean lookin....)
Maybe I should put less panel line on the head.... it should be better....
Compare with the D-style Death Saurer
Well....I think the D-style is more cute.
OK, D-style is bigger....
but Charizard at the back.
Last with Charizard
sadly, it not that cute as I wish....
Missing something? Where is MS dinner? Not really ready yet, but still-
"Free Dom" and "Disney" has a new "friend", but not complete yet.
(I don't know am I going to complete it....)
LB Burning Gojulas
LB Burning Gojulas is a variation of the LB King Gojulas. Compare to the original Gojulas, it's missing a lot of weapons, especially the chest Super Gatling Cannon. However, it's improve a lot of it deference and speed.
For deference power, base on it super strong and hard armor, Burning Gojulas equip a hyper E-shield generator to replace the Super Gatling Cannon, and install the Ray-Absorbing Verniers on the back(the fins). Give it's almost perfect protection from every direction.
For the speed, since they replace the heavy Super Gatling Cannon by Hyper E-shield Generator and Ray-Absorbing Verniers, the total weight is went down quite a lot but the Generator can has more output since Hyper E-shield Generator don't need that much output as the Super Gatling Gannon. The speed and mobility of LB Burning Gojulas has increase. Also it has add a few more booster on back and legs, give LB Burning Gojulas 50% more speed and 70% more mobility than LB King Gojulas.
For the weapons, since the Super Gatling Cannon has been remove, it miss most of it's fire power. Only the Super Sonic Blaster and a few deference weapons left around the tail. Even through the fire power has decrease a lot, but the Super Sound Blaster has power up thanks for cutting the Super Gatling Cannon and the Ray-Absorbing Verniers. It's also can choose from focus mode and diffuse mode, so it can still against a lot among of enemies. Also, the arms' claw been change to a Strike Laser Claw, give it even more damage during close combat.
Front-
Side-
Back-
Top-
Over all the spec is the same as the normal LB King Gojulas, but every time run the simulation or test battle, LB Burning Gojulas will won at the end. With the higher defense and speed, it soon get close to the LB King Gojulas. Then when they battle at close range, the E-shield can become weapons and the Strike Laser Claw can give a bigger damage. Or when both Zoids using Super Sound Blaster, since LB Burning Gojulas has more output, every time will end up LB Burning Gojulas winning too.
Although scientist said LB Burning Gojulas is only a variation of the LB King Gojulas, but there has rumor said, LB Burning Gojulas is a evolution of the LB king Gojulas by some of the unknown reason.
Action post 1
well....not much increase of the move-ability....
Actions post 2
I like this post better.
For the model itself, yes, it just base on my LB King Gojulas, and I just change some of the parts of building it. More important is, I try to make it to looks like the 1980's Godzilla feel, so I choose those make more fins on the back and cut the horn on the head. And since Bandai will release the Burning Godzilla(Godzilla in 1995)soon, I change the color scheme to be the Burning Godzilla's feel.
Compare to the LB King Gojulas
Not much special or improve to compare the original LB King Gojulas....
Compare to the SH Monsterarts
Since the Burning is not release yet, use this one first.
The final battle?
Well....don't have LB Space Gojulas(?) for now, so just use the Space Godzilla first.
The next, my Cal A entry-
PZ-006 Chamander
Poke Zoids(?)
Front
Side
Back
Some how I have some last min idea, since I'm not really good at paint job, and Cal A has some great entry already. But when lack of time, it extremely hard to finish another custom. So try to use repaint to make a Zoids to look like something. But what kind of something? I didn't through too much, until I saw this SD Death Saurer, then I'm thinking it looks like a pokemon, and after a little re-search, I design to re-color to a orange, hope it will looks like a chamander.
Since it don't have too much different color, it has done in a short time. After re-paint, I also add the decal eyes from some left over figure decal. But when everything put together, it doesn't looks what I hope for. Although it is cute, but it is not that cute as I through.
(Death Saurer is too mean lookin....)
Maybe I should put less panel line on the head.... it should be better....
Compare with the D-style Death Saurer
Well....I think the D-style is more cute.
OK, D-style is bigger....
but Charizard at the back.
Last with Charizard
sadly, it not that cute as I wish....
Missing something? Where is MS dinner? Not really ready yet, but still-
"Free Dom" and "Disney" has a new "friend", but not complete yet.
(I don't know am I going to complete it....)
)